EROWA fixture

Summary of fixtures and classification of work fixtures In daily fixture operations, the first thing we need to understand is what the scope of the work we do includes. The  Pofi   work fixture manufacturer  has sorted out nine scopes for everyone. How to clamp the workpiece during use, which will use the fixture. The following is a detailed introduction, I hope it will be helpful to everyone. 1. Summary of commonly used fixtures 1. The chuck, the chuck can be said to be a part that mechanical engineers are very familiar with. The chuck has a history of hundreds of years and can be said to be a very classic fixture. 2. T-type workbench, T-type workbench can be said to be very classic, there is T-type workbench where there are fixtures. 3. T-block, screw, pressure plate and nut. It is difficult to imagine how the workpiece should be clamped on the machine tool without these combinations. 4. Bench vise, maxi, work pieces that can't be pressed by the pressing plate can consider using

  Do you know about hydraulic chucks? Today, the Pofi  hydraulic chuck manufacturer  will introduce the common faults of hydraulic chucks and the daily maintenance of hydraulic chucks. Use and maintenance of hydraulic chuck During the use of the hydraulic chuck, we may encounter some use failures. Don't panic at this time. After years of use experience, we have sorted out the corresponding solutions, which are roughly divided into the following points: 1. The chuck does not clamp the workpiece tightly. The main reason is that the jaw stroke is not enough, the clamping force of the chuck is insufficient, the arc diameter of the soft jaw is different from the diameter of the workpiece, the cutting force is too large, the sliding surface of the sliding seat is lubricated and the speed is insufficient. If it is too high, the solution is to re-clamp the workpiece so that the jaws are at the mid-point of the stroke when clamping, check whether the set oil pressure meets the requirements,

  Pneumatic chuck advantages and characteristics and installation instructions The operation of CNC mechanical equipment is inseparable from the  pneumatic chuck , and the pneumatic chuck can ensure the accuracy of the lathe equipment. It has the advantages of simple structure, safety, and labor-saving installation. So how should the pneumatic chuck be installed? What are the advantages compared to ordinary chucks? Advantages of pneumatic chucks 1. Compared with ordinary chucks, the work efficiency of pneumatic chucks will be improved a lot, for example, in terms of clamping. And the practical life span will be much longer. 2. The pneumatic chuck structure is very simple, without those complicated parts, so the installation is very convenient and labor-saving, and it is not easy to cause mistakes. 3. In terms of consumables and energy, this is the most dazzling advantage, which can be called no consumption. Moreover, there is no pollution in environmental protection, which is an extrem